PRODUCTS

Pendulum Mill - PM


Combined grinding, de-agglomeration, drying and classification

Particle size top cut: 10 μm to 1,000 μm
Capacity: 0.1 t/h - 150 t/h
Mill power: 10 kW - 600 kW
Air Flow: 3,000 m³/h - 210,000 m³/h
Feed product size: 0 - 50 mm
Feed product moisture: 0 - 35%
Grinding ring dia.: 500 mm - 2,700 mm
Number of grinding rolls: 1 - 5

Pendulum Mill - PMX


Applications: Soft to Medium Hard Materials (Limestone, Talc, Graphite, Pigments, Chemical Products, etc.)

Impact Crusher Mill - ICM


Applications: Powder Coatings, Chemicals, Food & Sweets, Cosmetics, Pigments, Minerals

Air flow: 144 - 36000 m³/h
Dust load: 50 - 600 g/m³
Capacity: 10 - 21600 kg/h
Grinding speed: 60 - 130 m/s
Fineness: d97 10 - 400 μm
Hardness of material: 1 - 3 Mohs

Impact Crusher Mill - ICX


Applications: Chemicals, Food & Sweets, Lime Cycle Carbonates (GCC, PCC), Performance Minerals (Graphite, Talcum, Activated Carbon), Pigments & Paint (Iron Oxide, Titanium Dioxide, Carbon, Black)

Combined extra-fine dry grinding and classification of brittle materials
Particle size top cut: 5 μm to 50 μm
Capacity: 10 kg/h - 20,000 kg/h
Mill power: 2 kW - 600 kW
Air Flow: 100 m³/h - 40,000 m³/h
Feed product size: 0 - 10 mm
Grinding chamber dia.: 150 mm - 2,000 mm

Air Jet Mill - MJS


Completely automatic operation
Reduced wear on parts
No product contamination
Simple controls
Easy to dismantle for cleaning and sterilization
Highly efficient milling
Extremely low noise levels
Compact construction
Ideal for extra fine, hard and abrasive substances

Ball Mill - Microton


Applications: Synterized Alumina, Calcined Alumina, Hydrate Alumina, Clay, Bentonite, Caolin, Calcium Carbonate, Dolomite, Engobe, Felspar, Frit, Sanitary Ware Scraps, Magnesite, Olivine, Quartz, Zirconium Silicate, Talc, Zeolite

Cryogenic Pin Mill - MP


Adjustable operation parameters (disc rotating speed or direction), enables the possibility to adjust the grinding process according to different material and fineness.

Interchangeable grinding disc, available of different design and material, with various grinding tools and surface treatment to satisfy specific requirements
Easy product dimension regulation
Easy access for maintenance

Table Roller Mill - TRM


Compact design
Minimum space required
Easy set-up
Minimum maintenance
Low energy consumption
Withstands high stress

Impact Mill - JCF


Optimal energy efficiency
Low noise emission
Minimal maintenance
Compact machine, minimum space required
Excellent quality and reliability
Easy cleaning and maintenance
Reliability

Impact Mill - Compact


Compact design
Limited space requirement
Easy installation
Minimum maintenance
Reduced energy consumption due to the electronic operation control
Fully automatic operation process

Laboratory Type Mill - Galileo Line


Ease of operation: with automatic recognition of devices installed
Ease of use: the client is guided to introduce the required analytic objective and desired granulation, while the machine’s electro-mechanical parameters are regulated automatically
Ease of maintenance: interface with the control panel guides the tasks, methods and timing of maintenance
Ease of cleaning: every component of the machine is designed to be easy to clean, with polished internal surfaces and no rough or inaccessible areas
Low investment costs

Hammer Mill - HM


Applications: Minerals, Hydrated Lime, Bentonite, Bleach Earth

Sharp top cuts
Narrow particle size distribution
Grinding materials up to Mohs 3
Heavy duty design
Wear protected
Special discharge for abrasive contaminations
Energy saving
Low maintenance

Crusher Mill - MF


Easy to use and install
Ideal for depuration systems prone to limescale
Minimum maintenance
Low energy consumption
Withstands high stress